Posted by
admin on Oct 11th
A 1999 Mercury outboard engine that has a stainless steel propeller, working controls, an electronic tilt system, and an auto mixer. (Oil)
A 20 foot aluminum dual axle trailer. (Floats in water)
And finally, a 55 gallon aluminum gas tank.
Please respond ASAP, and thank you guys in advance.
Posted by
admin on Oct 5th

Product Description
Alternate part numbers: Sierra 8-GS62840, SIE_GS62840, SIE-GS62840, SIEGS62840, 47-GS62840… More >>
Sierra International GS62840 Marine Gas Lift Bracket
Posted by
admin on Oct 3rd

Product Description
Stainless bracket for gas lift support .
Alternate part numbers: Sierra 8-GS62850, SIE_GS62850, SIE-GS62850, SIEGS62850, 47-GS62850… More >>
Sierra International GS62850 Marine Gas Lift Bracket
Posted by
admin on Oct 2nd

Product Description
Stainless steel bracket for gas lift support
Alternate part numbers: Sierra 8-GS62900, SIE_GS62900, SIE-GS62900, SIEGS62900, 47-GS62900… More >>
Sierra International GS62900 Marine Gas Lift Bracket
Posted by
admin on Jul 27th

- Non-locking
- Spare
- Black
- Watertight
- For use with Perko Chromalex gas deck fills
Product Description
Gas Fills – Cap Only – Chrome-plated zinc with black plastic flange and cap that’s impervious to gasoline. complete with grounding lug and screw. 7/8 inch. 1 per display card. 1399DP0CHR locking cap has a cover for the key hole…. More >>
Perko 0126DP0BLK Black Marine Fuel Deck Fill Cap Only
Posted by
admin on Mar 17th
I intend to rebuild a in line six cylinder diesel with mechanical fuel injection. Rather than paying that ridicules price for a new one. And its intended for marine purpose. But the only difference I know is that the exhaust manifold has water running threw it so the boat/engine doesn’t burn up.
Is their any thing else that takes to make a marine engine ?
It is intended that the engine will be inhaling both fresh and salt water. From time to time.
Posted by
admin on Jan 20th
can a diesel water sepperator be used for a gas outboard engine, what is the differance. I know that a gas cant be used for diesel but can diesel be used for gas? why?I THINK I KNOW THE ANSWER BUT JUST WANT TO KNOW FOR SURE THANKS
Posted by
admin on Sep 7th
I brought my outboard in for some minor maintenance. Upon its return I went to have a day on the water. The motor would not start. The fuel line was inserted into the motor but not reconnected. I was told this is standard practice at this location.
Not a big deal – just some wasted time etc.
Posted by
admin on Feb 13th
I have a boat that has twin Mercruiser 7.4 motors with spin on fuel-water seperator filters. The starboard motor was starving for fuel and not able to achieve more than 3000 rpms. I replaced the filters and there was water in the fuel. You could see the water sitting in the bottom of a clear bowl when the fuel from the filter was poured in. I have been adding 99% rubbing alcohol to my fuel to help evaporate the water and bring it to the top to burn. I don’t think this is enough. After changing the filters I gained a few hundred rpms on the starboard motor but there is still a variance between motors. In addition, both motors cannot reach top rpms.
Does anyone know of a way short of running the boat and replacing filters until most of the water and fuel is gone to avoid this? Marine fuel docks seems to have a problem with water in teh fuel since ethynol was added. In addition, if you buy fuel when they have low tanks, that does not help either. Please help, thanks.
Recent Comments