Hydrogen Generator Dryer – Small

• Easy Maintenance
• HHO Gas Tight
• Durable See-Thru Plastic – Gradiant Density Melt Blown – Filter Down To 5 Micron
• 7″ Tall and 4.5″ in Diameter
• Included Are 3 Sets of Barbed Hose Fittings For Hose I.D. 1/4″, 3/8″ & 1/2″

Product Description
Helps keep any moisture from entering your engine with any hydrogen generator system.
To be installed right before your air intake – HHO gas in…. More >>

Hydrogen Generator Dryer – Small

Magnum water4gas HHO Safety Bubbler Hydrogen Vaporizer OD 0.35 inch /9 mm

• heat proof up to 212 Fahrenheit / 100 Celsius
• Easy to flush
• Made in Europe
• Lifetime durability
• Factory warranty

Product Description
MAGNUMTUNING FACTORY Safety Bubbler Hydrogen Vaporizer. BARBS FIT TO INTERNAL DIAMETER 3/16…1/4 inch (6-8 mm) hoses * * * HHO bubbler also referred to as hydrogen vaporizer helps to isolate the possibility of a spark migrating from the engine all the way to your HHO generator by passing the HHO gas through water. Bubblers are safety devices. A hydrogen vaporizer can help circulate the HHO and reduce the chances of a flashback destroying your HHO generator at the same time. The unit can be disassembled with hand power in 10 seconds at anytime. Magnum TuningTM has been dealing with manufacture of upgrades and water4gas systems since 1994. Our experience warrants peak performance, reliability & perfect style. * … More >>

Hydrogen Fuel Cell Kit

• Build-it-yourself passive airflow non-pressurized fuel cell kit
• Stack operating nominal voltage: 3.5 volts at 45 Degrees Celsius
• Stack nominal power output: 3.0 watts at 45 Degrees Celsius
• Total Electrode active area: 50 square centimeters
• Stack hydrogen consumption cc/minute

Product Description
Fuel cells are a nonpolluting power source that can help society overcome its dependence on fossil fuels and prevent global warming by reducing CO2 emissions. TDM, LLC has designed this low cost fuel cell kit to introduce alternative energy technology and electrochemistry. These kits can be fitted with varied sizes of graphite plates, membrane electrode assemblies (MEAs) and high temperature PBI membranes to run on hydrogen/air or direct methanol. This fuel cell kit is an excellent learning tool that gives hands-on experience with this promising technology.

Fuel from Water: Energy Independence with Hydrogen

Product Description
The book advocates hydrogen fuel as the best long-term alternative to fossil fuels and as a way to stop polluting the air and subsidizing terrorists. Shows how to generate hydrogen by electrolysis, how to convert an internal combustion engine to hydrogen, and how hydrogen can be used in home appliances…. More >>

Fuel from Water: Energy Independence with Hydrogen

HHO PWM With Digital Ammeter – Hydrogen Generator

• Pulse Width Modulator or PWM with Digital LED Ammeter and Wiring Kit
• Easy & Ready To Install
• 360 Views Available Upon Request
• Square Wave “Ortho” Hydrogen Generator Circuit
• Commercial Grade~~ An Excellent Value & A Quality PWM Kit.

Why must we use sodium hydroxide instead of sulfuric acid in making hydrogen gas?

When you make hydrogen gas commercially, you use a large steel vat as the mixing chamber. why must we use sodium hydroxide instead of sulfuric acid in this process?

What is the volume of 1M Hydrochloric acid will produce 32 of hydrogen gas at STP?

What volume (in L) of 1.00 M hydrochloric acid, when allowed to react with excess magnesium, will produce 32.5 L of hydrogen gas at STP?

fuel cells and water hydrogen for cars?

I see all these inventions on U TUBE about running cars on water or other types of fuel cells, question Do they really work and why aren’t manufacturer’s getting into this for future cars?

How do I calculate the molar amount of hydrogen gas here?

I’m not looking for someone to give me the answer – I just need to know what to do.

“Using the balanced chemical equation you have, calculate the molar amount of hydrogen gas that was produced in your reaction.”

The equation: Mg + 2HCl –> H2 + MgCl2

Magnesium: 0.013 g; 5.3 x 10^ -4 mol

What do I do with all this?

is it possible to use water for fuel,if you seperate the oxygen from the hydrogen?