Magnum Charger for HHO cell to supercharged gas Engines 12V DC

• Essential for turbo HHO projects
• Filter included
• PVC piping included
• Threaded HHO barb included
• Factory warranty

Product Description
MAGNUMTUNING FACTORY AIR PRESSURE BOOSTER FOR TURBO VEHICLES CONVERTED TO HHO * On turbo or supercharged applications you need to install a pressure booster pump to your HHO generator because turbo engines do not aspirate the hydrogen fuel led to their low pressure intake tract. Magnum Hydro-Aid air pump standing for delivery of the hydrogen at higher pressure providing sufficient gas flow intensity. INSTALLATION 1. Screw the M14 x 1 threaded hose connector in your hydrogen generator. 2. Connect the PVC hydrogen hose between the generator and the Hydro-Aid. 3. Wire up the pump’s red wire to the switched +12V DC contact of your HHO generator. 4. Ground the black wire to the chassis or the battery negative. Pleas… More >>

Magnum Hydro-Aid Pressure Booster for HHO cell to turbocharged gas Engines 12V DC

• Essential for turbo HHO projects
• Filter included
• PVC piping included
• Threaded HHO barb included
• Factory warranty

Product Description
MAGNUMTUNING FACTORY AIR PRESSURE BOOSTER FOR TURBO VEHICLES CONVERTED TO HHO * On turbo or supercharged applications you need to install a pressure booster pump to your HHO generator because turbo engines do not aspirate the hydrogen fuel led to their low pressure intake tract. Magnum Hydro-Aid air pump standing for delivery of the hydrogen at higher pressure providing sufficient gas flow intensity. INSTALLATION 1. Screw the M14 x 1 threaded hose connector in your hydrogen generator. 2. Connect the PVC hydrogen hose between the generator and the Hydro-Aid. 3. Wire up the pump’s red wire to the switched +12V DC contact of your HHO generator. 4. Ground the black wire to the chassis or the battery negative. Pleas… More >>

100A HIGH-AMP PWM PULSE WIDTH MODULATOR 12-24V CONSTANT to HHO water4gas Cell 100Hz

• High Performance: 100 Amps current
• Fully adjustable output – 12…24V input
• Ventilator fan assembled on the unit
• Applicable to all HHO projects
• Each PWM tested / inspected prior to shipping

Product Description
MAGNUMTUNING FACTORY HHO PWM. Pulse Width Modulation, also referred to as PWM is a method of transmitting information on a series of pulses. PWM is a modulation technique for forming variable width pulses to represent the amplitude of an analog wave or signal. Adjustment allows you to control the volume of hydrogen production. The process is easy to follow, however it takes time to understand. The optimal hydrogen production depends on several factors affecting the fuel consumption as well. You need to establish a fully active hydrogen production without extreme heat generation would lead to undesired loss in hydrogen performance. You might need to set the volume of hydrogen production with the PWM unit’s poten… More >>

HIGH-AMP PWM PULSE WIDTH MODULATOR 12-24V CONSTANT 80A to HHO water4gas Cell

• High Performance: 80 Amps current
• Fully adjustable output – 12…24V input
• Ventilator fan assembled on the unit
• Applicable to all HHO projects
• Each PWM tested / inspected prior to shipping

Product Description
MAGNUMTUNING FACTORY HHO PWM. Pulse Width Modulation, also referred to as PWM is a method of transmitting information on a series of pulses. PWM is a modulation technique for forming variable width pulses to represent the amplitude of an analog wave or signal. Adjustment allows you to control the volume of hydrogen production. The process is easy to follow, however it takes time to understand. The optimal hydrogen production depends on several factors affecting the fuel consumption as well. You need to establish a fully active hydrogen production without extreme heat generation would lead to undesired loss in hydrogen performance. You might need to set the volume of hydrogen production with the PWM unit’s poten… More >>

Hydrogen Fuel Cell Kit

• Build-it-yourself passive airflow non-pressurized fuel cell kit
• Stack operating nominal voltage: 3.5 volts at 45 Degrees Celsius
• Stack nominal power output: 3.0 watts at 45 Degrees Celsius
• Total Electrode active area: 50 square centimeters
• Stack hydrogen consumption cc/minute

Product Description
Fuel cells are a nonpolluting power source that can help society overcome its dependence on fossil fuels and prevent global warming by reducing CO2 emissions. TDM, LLC has designed this low cost fuel cell kit to introduce alternative energy technology and electrochemistry. These kits can be fitted with varied sizes of graphite plates, membrane electrode assemblies (MEAs) and high temperature PBI membranes to run on hydrogen/air or direct methanol. This fuel cell kit is an excellent learning tool that gives hands-on experience with this promising technology.

Could a person use a device that splits water like for hydrogen fuel cell car but keep oxygen for scuba diving?

I heard that this canadian invented a device that splits water into hydrogen and oxygen. Companies use this device to store hydrogen in tanks until it can be used for a hydrogen fuel cell car(like they do in iceland). My question is can you store the Oxygen instead to go on the ultimate scuba adventure? My dads a scientist, but we’re not talking right now so I thought I would ask here.

Why does my water in my hydrogen fuel cell turn to a weird color?

When I turn on my hydrogen fuel cell or HHO fuel cell and it runs for a little bit, the water starts to turn like yellowish brownish. And it starts to form bubbles on the top of the water that turn really dark brown or black. What kind of water do I need to use and if I need to mix something in with the water, what is it?
Thanks Dave I didn’t want to mention that i was using tap water because I wanted to see if someone would state that could be the problem, but when i use distilled water do I need to mix anything in with it. Or can I for better results?

how much baking soda should i put in the water for hho fuel cell?

the fuel cell holds about a half a gallon of water it has seven plates configured like this -nn+nn- the n stands for neutral
I was thinking of 4tsp of baking soda in a gallon of water and maybe a little vinegar but im not sure?

HHO Dry Cell 21 Plates

• Dry Cell 21 plates

Product Description
* 21 Plates of 316L Stainless Steel Plates
* Demensions: 20.3*10.8*8.7 cm
* High temperature Cast Acrylic end Plates
* Dual 1/4″ 90 Degree NPT Elbows with Hose Barbs
* Neoprene Rubber Rings
* Net Weight: 2.71kg
* Our Dry Cell is expandable. Plate size is 7.8*18 cm (3*7 inch). * Plate’s thickness: 1mm (brushed)
* Production: 2LPM to 8LPM.
* Working at 10v to 30v, 3amp to 50amp…. More >>

HHO Dry Cell 21 Plates

HHO Dry Cell

• Powerful 4″x4″x2″ 316L Stainless Steel produces 2.25 LPM @ 30 amps 5 year life expectancy
• Top quality materials. Steel goes through unique three step process for optimum HHO production
• Don’t Just Buy Products Join Our Club. We Work With All Members To Get Them Results
• Free membership to our club. Includes installation manuals along with our vehicle database
• Vehicle database shows all cars we/members have installed on, with their MPG results and how acheived